Passat L4-1.8L Turbo (AWM) (2004)
/Page-2670002.png)
-
Remove nut -1-.
-
To facilitate removal of suspension strut, apply an open-end wrench -1to wrench surfaces -arrow- of track-control link -2-.
-
Turn wrench in direction of arrow (direction of travel) and remove bolt -3-.
-
Swing wheel bearing housing to side.
-
Unscrew hex bolts -1- in plenum chamber.
-
Take out suspension strut with mounting bracket.
Note: Do not damage joint protective boot when doing this!
