Passat L4-1.8L Turbo (AWM) (2004)
/Page-1982017.png)
-
Replace O-ring -arrow.
-
Install cover for front final drive.
Tightening sequence:
^
Stage 1: tighten bolts -1-, -2- and -3- hand-tight.
^
Stage 2: tighten bolts -1- to -12- to specified torque in the sequence indicated.
-
Remove right-hand transmission bracket.
-
Install left-hand flanged shaft.
-
Install right-hand flanged shaft.
-
Install flanged shaft bolt -arrow- and secure against turning using a punch.
-
With transmission installed, check gear oil in front final drive.
