Passat L4-1.8L Turbo (AWM) (2004)
^
Connect connector - arrow - to Transmission Vehicle Speed Sensor (VSS).
^
Install oil pan.
^
Add ATF, check ATF level and top off.
Transmission Input Speed (RPM) Sensor G182, Replacing
Transmission Input Speed (RPM) Sensor G182, replacing, 01V, 5 SPD. A/T (AWD)
There is a distinction made between two types of hydraulic control:
Information regarding which control is installed.
Distinguishing characteristics.
Transmission with hydraulic control E17
Removing
^
Remove valve body with hydraulic control E17.
^
Turn valve body on its back side and loosen connector at Sensor for transmission RPM - 1 -
^
Unbolt Sensor for transmission RPM - 1 - at valve body.
Installing
Installation position:
Sensor-side with the connector terminals points to valve body center.