Passat L4-1.8L Turbo (AWM) (2004)
Sequence for disassembling and assembling
Lubricate mounting and sliding surfaces with Polyurea grease Part No. G 052 142 A2.
1. Selector lever handle
^
Removing and installing
2. Sleeve
^
Clips into selector lever handle
^
Installation position: Angled section faces inward
3. Cover
^
With trim piece -6-, symbol panel -7-, cover strip -8- and guide -9-
^
Lift up to remove
^
Removing connector for selector lever lock and Tiptronic
4. Guide sleeve
^
Slide onto selector lever -14-
^
Installation position: Engage foot to rear
5. Cover molding
^
With trim piece -6- and symbol panel -7-
^
Cannot be replaced as single item
6. Trim piece
^
Integrated in symbol panel -7- in cover molding -5-
^
Cannot be replaced as single item
7. Symbol panel
^
With printed circuit
^
With Tiptronic switch -F189- integrated in printed circuit
^
Integrated in trim piece -6- in cover molding -5-
^
Cannot be replaced as single item