Passat L4-1.8L Turbo (AWM) (2004)
Do not deform selector shaft lever when pressing on or else shifting cannot be precisely adjusted any more.
^
Align selector lever cable tension-free into longitudinal holes on bracket.
^
Tighten bracket/transmission - arrows 1 - to tightening torque.
^
Tighten selector lever/bracket - arrow 2 - to tightening torque. During this, counterhold at hex socket - arrow 3
^
Check selector mechanism.
^
Install left transmission support.
Vehicles with V6- and V8-engine
^
Install heat shield/selector lever cable.
^
Install front exhaust pipe with catalytic converter.
Continued for all vehicles
^
Install noise insulation - arrows -.
^
In vehicles with auxiliary heater, bolt exhaust pipe firmly to noise insulation.
Selector Lever Handle, Removing and Installing
Selector lever handle, removing and installing, 01V, 5 SPD. A/T (AWD)
There are different handles which are removed and installed differently.
^
Before any repair work, slide sleeve on selector lever slightly downward.