Passat L4-1.8L Turbo (AWM) (2004)
^
Then check ATF level and top off.
Auxiliary ATF Cooler, Removing and Installing
Auxiliary ATF cooler, removing and installing, 01V, 5 SPD. A/T (AWD)
Special tools, testers and auxiliary items required
Drip tray V.A.G. 1306
Torque wrench 550 Nm V.A.G. 1331
Removing
^
Remove cover from front bumper.
^
Place drip tray V.A.G. 1306 underneath.
^
Always clean area of ATF line/auxiliary ATF cooler connection.
^
Disconnect ATF lines from auxiliary ATF cooler - arrows -.
^
Plug ATF lines and auxiliary ATF cooler using clean plugs.
^
Unscrew bolts - 1 - from auxiliary ATF cooler - arrow A -.