Passat L4-1.8L Turbo (AWM) (2004)
33. Pressure control valve 4 -N218-
^
With O-ring
^
Moisten O-ring with ATF and insert
34. Pressure control valve 2 -N216-
^
With O-ring
^
Moisten O-ring with ATF and insert
35. Solenoid valve 1 -N88-
^
Without O-ring
^
To replace: Remove and install oil pan and remove guide plate for parking lock mechanism
^
When installing, do not tighten bolts for guide plate (23 Nm) with selector lever in "P"
36. Bolt, 6 Nm
37. Magnet
^
4 magnets in depressions in oil pan
^
Always clean when oil pan is removed
^
Ensure correctly seated in oil pan
38. Oil seal
^
Always replace
39. ATF inspection plug
Valve Body For Transmissions With Hydraulic Control E18/2, Assembling and Disassembling
Sequence
Valve body for transmissions with hydraulic control E18/2, assembling and disassembling sequence, 01V, 5 SPD. A/T (FWD)
Special tools and equipment
VAG 1306 Drip tray
VAG 1331 Torque wrench
Removing
-
Observe general repair instructions.
-
Replace soiled or defective valve body.