Passat L4-1.8L Turbo (AWM) (2004)
/Page-2090006.png)
^
Insert connector with flat part - arrow A - facing toward oil pan into transmission housing.
^
Align valve body to hole in transmission housing - arrow C - using alignment pin - arrow B -.
^
Set valve body in place while placing bolt of notched disc - 1 - into the groove of the selector register - 2 -.
^
Tighten bolts for valve body - arrows - hand-tight.
Bolt - arrow A - is shorter than the other bolts.
^
Tighten bolts to tightening torque starting from inside toward outside.
