Passat L4-1.8L Turbo (AWM) (2004)
/Page-2090013.png)
^
Set valve body in place while placing bolt of notched disc - 1 - into the groove of the selector register - 2 -
^
Tighten bolts for valve body - arrows - hand-tight, starting from inside toward outside.
Bolt - arrow A - is not installed and can be disregarded.
^
Tighten bolts to tightening torque starting from inside toward outside.
^
Connect connector - A - to Transmission Vehicle Speed Sensor (VSS) G38.
^
Pull wire to Sensor for transmission RPM upward between valve body and wiring harness.
^
Connect harness connector - B - to Transmission Input Speed (RPM) Sensor G182.
