Passat L4-1.8L Turbo (AWM) (2004)
/Page-2117006.png)
^
Disconnect battery Ground (GND) strap with ignition switched off.
^
Place a lint-free cloth into plenum chamber beneath return hose to brake fluid reservoir.
^
Clamp off return hose - A - to brake fluid reservoir using hose clamps 3094, disconnect at connecting tube of master cylinder and seal.
^
Remove grommet for return hose - A - from bulkhead.
^
Pull out clip - C - to stop using a screwdriver and then pull hose/line assembly - B - out slightly.
^
Disconnect harness connector for Brake Fluid Level Warning Switch F34 from brake fluid reservoir.
^
Remove bolt - 1 -.
^
Carefully remove bolts - 3 - and - 4 - from brake booster using Torx insert T45.
^
Remove storage compartment on drivers side.
^
Disconnect clutch pedal from master cylinder. To do so, pry out bolt lock using screwdriver - arrow 1 - and pull out bolt - arrow 2 -.
