Passat L4-1.8L Turbo (AWM) (2004)
Vehicles with a threaded hole on front face of rear final drive
-
Mount measuring tools.
Vehicles without threaded hole in front side of rear final drive
-
Mount assembly appliance VW 792 in center hole (arrow) for right side axle shaft protective plate.
-
Mount universal dial gauge bracket VW 387 with dial gauge to assembly appliance VW 792.
Continuation for all vehicles
-
Set dial gauge to zero with 1 mm preload and position on ground surface (arrow) in flange.
-
Turn flange one complete rotation.
-
Mark maximum run-out on edge of flange with a colored dot (corresponds to maximum distance from rotational axis).
-
Remove previous marks on flange.