volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Wheel Bearing|Front|Page 8588 > < Wheel Bearing|Front|Page 8586
Page 7
background image

-

VAG 1459 B/2 Supplementary set

-

Separating device Kukko 17/2

-

Bell E-40

-

Press piece E-43

-

Press sleeve E-44-1

-

Press piece E-45

Special tools and equipment required

3. Kukko 17/2 Separating device
-

Loosen hex bolt for drive shaft when vehicle is standing on its wheels (otherwise danger of accident).

-

Remove wheel and raise vehicle.

-

Pull out securing clip -1- and unhook parking brake cable from brake caliper.

Note:  Do not damage parking brake boot when removing and installing.

-

Remove brake carrier and brake caliper and tie to body with wire.

-

Remove disc brake and cover plate.

-

Disconnect ABS vehicle speed sensor out from wheel bearing housing.

Wheel Bearing|Front|Page 8588 > < Wheel Bearing|Front|Page 8586