Passat L4-1.8L Turbo (AWM) (2004)
^
Turn steering as far as possible toward left.
^
Remove cover plate over right drive axle - arrow 1 - and - arrow 2 -.
^
Remove cover plate over left drive axle, if installed.
^
Place drip tray underneath.
^
Unscrew drive axle from flange shaft.
^
Tie up drive axle as far away as possible. This ensures that drive axle paint is not damaged.
When replacing left seal:
^
To remove drive flange, bolt Puller T10037 to differential cover - arrow -.
When replacing right seal:
^
To remove drive flange, bolt Puller T10037 to transmission cover - arrow -.
^
Always replace circlip for flange shaft.