Passat L4-1.8L Turbo (AWM) (2004)
-
Distance -a- must be 41 mm.
-
If this is not the case, adjust dimension -a- as follows:
-
Loosen push rod screw (arrow).
-
The connection push rod/selector mechanism must move freely.
-
Set to dimension -a- by moving selector mechanism.
-
Tighten slide rod bolt (arrow) to 25 Nm.
-
Loosen selector rod bolt (arrow).
-
The connection selector rod/selector mechanism must move freely.
-
Align shift lever so that it is positioned vertically.
-
When doing this, it must point slightly to rear in direction of travel, -a-.
-
Tighten selector rod bolt to 25 Nm.
-
Fit shift lever knob and cover.