Passat L4-1.8L Turbo (AWM) (2004)
Installing
Installation is reverse of removal, noting the following:
When attaching, shift knob must engage into annular groove of shift lever.
Shift Rod and Pivot Rod, Servicing
Shift rod and pivot rod, servicing, 012/01W, 5 SPD. M/T
1. Shift lever bushing
2. Bolt, 6 Nm
^
Qty. 4
^
For shift lever bushing at shift mechanism housing
3. Socket head bolt, 25 Nm
4. Washer
5. Socket head bolt, 25 Nm
6. Clamping piece
7. Hex nut, tighten to 10 Nm
^
Qty. 4
^
Shift mechanism housing to body
8. Hex nut, tighten to 10 Nm
^
Self-locking
^
Always replace
9. Shift lever
10. Spacer tube
11. Shift fork
12. Bolt
13. Shift mechanism housing