Passat L4-1.8L Turbo (AWM) (2004)
/Page-2182013.png)
Tightening torques
Selector Mechanism, Removing and Installing
Selector mechanism, removing and installing, 012/01W, 5 SPD. M/T
Removing
^
Carefully pry off shift lever boot from center console.
^
Remove shift knob with shift lever boot.
^
As of 11/00 remove shift knob with shift lever boot.
^
Rubber cover for shift mechanism housing must be removed - arrows -.
^
Now unscrew securing nuts for shift mechanism housing - arrows -.
^
Removing exhaust system behind catalytic converter, remove front exhaust system, if necessary.
