Passat L4-1.8L Turbo (AWM) (2004)
/Page-2182016.png)
^
Install covers and shift knob
Function
^
Shift lever must rest in 3rd/4th shift gate when transmission is at idle.
^
Operate clutch.
^
Shift through all gears several times. Pay particular attention to function of reverse gear lock.
^
Shift lever should return by itself from the 5th/reverse gear and move into 3rd/4th shift gate.
^
Engaging reverse gear must only be possible when shift lever rests at idle in 3rd/4th shift gate.
^
When shift lever is engaged in 5th gear, straight shifting to reverse gear may not be possible.
Note:
^
If straight shifting is possible, or only 5th gear and reverse gear cannot be engaged, the 5th and reverse gear lock must be checked and replaced
if necessary.
Shift Mechanism on Transmission Side, Disassembling and Assembling
Shift mechanism on transmission side, disassembling and assembling, 012/01W, 5 SPD. M/T
Special tools, testers and auxiliary items required
^
Needle Bearing Drift VW 295
^
Adapter VW 295 A
^
Thrust Plate VW 401
^
Tube 28mm Dia. 210 mm VW 420
^
Sleeve VW 423
^
Spacer sleeve VW 472/2
Special tools, testers and auxiliary items required
