Passat L4-1.8L Turbo (AWM) (2004)
^
Push shift rod on so that securing bolt fits into recess of shift rod.
^
Secure shift rod - arrow A - first.
^
Secure pivot rod to transmission - arrow B -.
^
Assemble exhaust system.
Tightening torques
Shift Mechanism, Adjusting
Shift mechanism, adjusting, 01A, 5 SPD. M/T (AWD)
Note:
^
Requirements for a correct shift adjustment are the following points:
^
Components of shift mechanism and linkage must be in proper working condition.
^
Shift mechanism must move freely
^
Furthermore, transmission, clutch and clutch mechanism must be in proper working condition.
^
Transmission in neutral
^
Carefully pry off shift lever boot from center console.
^
Remove shift knob with shift lever boot.
^
As of 1100, remove shift knob with shift lever boot.
^
Rubber cover for shift mechanism housing must be unscrewed - arrows -.
^
Measure distance between chassis and shift mechanism.