Passat L4-1.8L Turbo (AWM) (2004)
/Page-2183018.png)
6. Shift rod
Gear Lock For 5TH Gear and Reverse Gear, Checking and Replacing
Gear lock for 5th gear and reverse gear, checking and replacing, 01A, 5 SPD. M/T (AWD)
^
Remove cover plate - arrow 2 - above right drive axle.
^
Press down cover plate - arrow 1 - above right drive axle.
^
Remove gear lock - arrow -.
^
Checking and assembling gear lock:
^
Insert spring - 1 - into housing - 2 - and, while applying light pressure turn spring to left until it locks into base of housing.
^
Insert bushing - 3 - onto spring so that bent end of spring locates into groove properly.
^
Push bushing - 3 - against spring and turn approximately one turn until lug on bushing aligns with groove in housing - 2 - Press bushing - 3 -into
groove in housing - 2 - to stop.
^
Rotate bushing - 3 - clockwise and release; bushing - 3 - jumps into installation position. Installation position of bushing:
