Passat L4-1.8L Turbo (AWM) (2004)
Power Window Switch: Service and Repair
Power Window Switches In Driver's Door - With Blue Instrument Cluster Illumination, Removing
and Installing -
Power Window Switches In Driver's Door - Vehicles With Blue Instrument Cluster Illumination, Removing And Installing
NOTE: On vehicles with blue (instrument cluster) illumination, individual power window switches in the driver's door cannot be removed/replaced
separately. The complete switch unit must be removed.
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Remove driver's door handle
-
Lift release handle with controls upwards from door trim and carefully turn over.
-
Disconnect electrical connections.
-
Remove screws -arrows- and pull switch module from trim.
Installing
-
Install in reverse order of removal.