Passat L4-1984cc 2.0L DOHC (9A) (1990)
Turn Signal Switch: All Technical Service Bulletins
Steering Column Switches - Re-Routing , USA Only
Subject:
Steering column switches, wire routing
Model(s):
Corrado, Passat (with automatic shoulder belt system
and height adjustable steering column - USA only)
1990-1991 M.Y
Group:
94
Number:
90-01
Date:
October 31, 1990
Steering column switches, wire routing
If any of the steering column switches (windshield wiper, turn signal, cruise control, ignition, etc.) are removed/installed, the switch wires must be
properly re-routed against the steering column.
CAUTION
Routing wires incorrectly on steering column may cause wire damage and lead to inoperative components, shorts/ grounds and blown fuses.
^
route wires against side of steering column
^
DO NOT route wires between steering column and knee bar (arrow)
^
if necessary, fasten wires with tie-wrap