volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

A/T - Harsh Engagement Into Drive|Page 4177 > < CIS E, A/T Control Module - Revised|Page 4172
Page 1
background image

Engine Control Module: All Technical Service Bulletins
A/T - Harsh Engagement Into Drive

Group:

37

Number:

91-04

Date:

August 31, 1991

Subject:

Harsh Engagement When Selecting Drive Gear

Passat 1990, 1991 m.y. with 096 Transmission

Model(s): (Supersedes Group 35, Number 91-01 dated March 31, 1991)

Condition

Harsh engagement when moving from Park, Reverse and/or Neutral into Drive "D" gear.

Note

The transmission should not be replaced for this condition alone.

Service

Establish the EPROM level of the Digimat ECU installed in the vehicle.

^

connect VAG 1551 Tester to the vehicle (Check Repair Group D3-20-1 and D3-30-1)

^

switch VAG 1551 printer on

^

after entering address word "02" read either 1551 display window and/or printer tape noting ECU identification.

^

Digimat EPROM level is the four (4) digit number after the word "DIGIMAT" of the identification

EXAMPLE

095927731AE DIGIMAT 0609
CODING 127

WSC131071

0609 is the EPROM level of the ECU

Digimat ECU with EPROM level of 0609 or higher MUST be used to resolve this complaint.

A/T - Harsh Engagement Into Drive|Page 4177 > < CIS E, A/T Control Module - Revised|Page 4172