Passat L4-1984cc 2.0L DOHC (9A) (1990)
Band: Service and Repair
Remove/Install
FREE WHEEL AND REVERSE GEAR BRAKE, 096 TRANSMISSION - B1-
Removing and Installing
1
- Circlip
- For supporting tube -B2-
2
- Circlip
- For free wheel
3
- Free wheel with -B1- piston
- Before removing free wheel, remove valve body and sealing plugs
- Disassembling and assembling
4
- Dished spring
- Install with convex facing free wheel
5
- Pressure plate
- Install with flat side facing plates
- Differing thicknesses depending on number of inner plates installed:
Up to transmission build date 16 08 2:
- With 4 inner plates 7.5 mm (0.295 in.) (an additional 3.7 mm (0.146 in.) shim -8- is installed)
- With 5 inner plates 7.5 mm (0.295 in.)
From transmission build date 17 08 2:
- With 4 inner plates 11.1 mm (0.437 in.)
- With 5 inner plates 7.5 mm (0.295 in.)
Transmissions from 01-93:
- With 4 inner plates 13.5 mm (0.531 in.)
- With 5 inner plates 10.5 mm (0.413 in.)
6
- Inner plate, -B1-