Passat V6-2.8L (ATQ) (2004)
Trunk / Liftgate Lock: Service and Repair
Up To 09/2000
Tailgate Lock (wagon), Assembly Overview --> 09.00
1
-
Lock cylinder carrier
-
Lock cylinder can only be removed in conjunction with carrier.
2
-
Nut
-
7 Nm
3
-
Handle trim
-
Lock cylinder carrier, removing.
- Disconnect harness connector for license plate light.
- Remove nuts - 2 - and remove handle trim from tailgate.
-
Installing:
- Installation is reverse of removal.
4
-
Handle
5
-
Push button
6
-
Pop rivet
-
Pull in using Pop rivet tongs V.A.G 1765 B
7
-
Base for license plate
-
Press on only on hatched area.
-
Replacement part has two foils. first foil covers adhesive surface, second must be removed after installing.
8
-
Operating rod
9
-
Lock
-
Removing.
- Remove trim for tailgate.
- Disconnect harness connector from lock.