Passat V6-2.8L (ATQ) (2004)
Front brake caliper piston, removing and installing
Special tools and equipment
^
3409 Wedge
^
Piston resetting tool
Removing
^
Force piston from brake caliper housing using compressed air.
Note:
^
Place a wooden board in the recess of the caliper housing to prevent damaging the piston.
^
Only one piston at a time can be forced out. When doing this hold the other piston in the caliper using the piston resetting tool.
^
Remove protective seal out of piston groove using 3409 wedge.
^
Remove piston.
Note: When removing make sure that the surface of the cylinder is not damaged.