Passat V6-2.8L (ATQ) (2004)
/Page-802002.png)
-
3212 Two-hole spanner wrench
-
3312 Wrench
Removing
CAUTION: Before removing ribbed belt, mark direction of rotation. Belt damage will result if not reinstalled in proper direction.
-
Remove engine cover/trim.
-
Bring front end assembly (lock carrier) into service position. See: Body and Frame/Lock Carrier/Service and Repair/Procedures
-
Counter-hold viscous coupling pulley with spanner 3212 and remove viscous coupling using wrench 3312 (left-hand thread, -arrow-).
