Passat V6-2.8L (ATQ) (2004)
Air Door Cable: Service and Repair
Heating and A/C Cables, at HVAC Case
Temperature And Central Flap Cables, Removing And Installing
NOTE:
-
Cable sleeve ends are color coded.
-
When Installing secure cable to heated/evaporator unit first.
-
Check cables before installing and replace binding or damaged cables.
Removing
-
Remove heating and A/C controls
-
Remove instrument panel
-
Remove footwell air outlet.
-
Disconnect cable for central flap or temperature flap on heater/evaporator unit.
Installing
Illustration shows right-hand drive version.
1
-
Central flap cable, sleeve marking: Black
2
-
Temperature flap cable, sleeve marking: Red
3
-
When attaching inner cable note: Do not press end of wire (arrow) against lever.