Passat V6-2.8L (ATQ) (2004)
Control Assembly: Service and Repair
Heating and A/C Controls, Removing and Installing
Heating And A/C Controls, Removing And Installing
Removing
-
Carefully remove trim panel by depressing locating lugs -arrows- with a covered screwdriver. Do not damage instrument panel.
-
Remove instrument panel screws -arrows-.
-
Remove center trim panel.
-
Pull controls with cables attached from instrument panel.
-
Release cables on controls.
-
Disconnect electrical connector.
Installing
NOTE:
-
Cable sleeve ends are color coded.
-
Check cables before installing and replace binding or damaged cables.
-
All air flaps must audibly move onto end stops when turning controls.
-
Mount eyelet on end of cable -1- onto control -arrow 2-.