Passat V6-2.8L (ATQ) (2004)
33
Molded hose
34
Ground (GND) connection
-
Check for secure fitting
Fig. 1 Installed position of Fuel Pump (FP)
Marking on Fuel Pump (FP) -1- must align with marking on fuel tank -2-.
NOTE: After installing Fuel Pump (FP), check whether supply, return and vent lines are still clipped in at fuel tank.
Fig. 2 Checking change-over valve
Valve in rest position: closed
Valve pressed in direction of arrow: open
Fig. 3 Checking pressure retaining valve
The pressure retaining valve is open in both flow directions (arrow -1) from gravity valve side.
It is only open in one flow direction (arrow 2) from T-piece of EVAP container/solenoid valve 1.
All Wheel Drive (AWD) Vehicle
Fuel tank with attachments and fuel filter, removing and installing
All Wheel Drive (AWD) vehicles