Passat V6-2.8L (ATQ) (2004)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor 2
Fuel tank with attachments and fuel filter, removing and installing
All Wheel Drive (AWD) vehicles
1
Cap
2
Seal
-
Replace if damaged
3
Mounting screw
4
Tank lid unit
-
with rubber cap
5
O-ring
-
Replace if damaged
6
Bleeder valve
-
to remove, unclip valve sideways from connection
-
before installing, unscrew cap, item 1
-
Checking Fig. 2
7
Connection hose
8
Gravity valve
-
To remove, unclip valve upward from connection
-
Checking valve for throughput
Valve vertical: open,
Valve tilted 45 degrees: closed
9
25 Nm
10
Fuel filler neck
11
Check-valve
-
Note installation position: white valve side faces toward the sealing cap
12
Connection hose
13
Heat shield