Passat V6-2.8L (ATQ) (2004)
Installing
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates
on the bulb during operation can cause the glass to cloud over.
-
Reinstall socket (with connector) into headlight housing. Lock socket in place by turning clockwise.
-
Reinstall cover cap.
-
Check headlight (bulb) function.
Turn Signal Lamp -M5- / -M7-, replacing
NOTE: It is not necessary to remove the headlight housing in order to replace the turn signal bulb. Headlight housing is shown removed here for
illustration purposes only.
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Turn socket (with connector) -1- counterclockwise -arrow- and pull out of headlight housing.
-
Replace bulb.
Installing
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates
on the bulb during operation can cause the glass to cloud over.
-
Reinstall socket (with connector) into headlight housing. Lock socket in place by turning clockwise.
-
Check turn signal (bulb) function.