Passat V6-2.8L (ATQ) (2004)
-
Carefully remove HID bulb.
Installing
CAUTION: Do not touch glass portion of bulb with bare hands. Even the smallest amount of moisture and/or contaminants from fingers that evaporates
on the bulb during operation can cause the glass to cloud over.
-
Insert new bulb, making sure that the bulb mounting aligns with the locating lugs in the housing.
-
Lock connector coupling into place by turning clockwise 90 degrees.
-
Reinstall cover cap -1- and secure with screws -arrows-
-
Reinstall headlight housing.
-
Check headlight (HID lamp) function.
-
Check headlight aim.
High Beam Headlamp -M30- / -M32-, replacing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Unclip retainer -3-, pull latch -8- from guide and remove cover cap from rear of headlight housing