Passat V6-2.8L (ATQ) (2004)
Electronic Throttle Control Module: Service and Repair
Throttle Valve Control Module, Removing and Installing
Throttle Valve Control Module, Removing And Installing
1. Intake manifold
2. To suction jet pump
3. To fuel pressure regulator
4. T-piece
5. To check-valve
6. Vacuum hose
7. O-ring
-
replace if damaged
8. Mounting bracket
-
for change-over roller
9. 6 Nm
10. Intake Air Temperature (IAT) Sensor -G42-
11. Intake air scoop
12. 10 Nm
13. to crankcase breather valve
14. Seal
-
replace if damaged
15. 10 Nm
-
Insert with locking fluid (e.g.: D 000 600 A2)
16. Throttle Valve Control Module -J338-
-
Heated by coolant
17. To Evaporative Emission (EVAP) canister purge regulator valve
-
In engine compartment at air filter.
18. Seal
-
replace if damaged