Passat V6-2.8L (ATQ) (2004)
-
Connect diagnostic cable VAS 5051/5A connector or VAS 5051/6A to Data Link Connector (DLC).
-
Switch tester on - arrow -.
The tester is ready for operation when a picture of a vehicle is displayed.
-
Switch ignition on.
-
On display, select field "Guided Fault Finding".
-
Select in order:
-
Type
-
Model year
-
Variations
-
Engine code
-
Confirm entered data.
Wait until the tester has interrogated all available control modules in the vehicle (vehicle system test).
Once all control modules have been checked:
-
Press "Go to" button.
-
Select "Function/component selection".
-
Then press "Drivetrain (Rep. Gr. 01; 10 to 26; 28 to 39)".
-
Select engine code.