Passat V6-2.8L (ATQ) (2004)
-
Connect Multi-Function Transmission Range (TR) Switch -F125- (-3-) to shift rod -1-.
-
Flat part at splines in Multi-Function Transmission Range (TR) Switch -3- must align with flat part of shift rod -1-.
-
Rotate multi-function switch -3- until the alignment bore -4- can be fitted on the alignment pin -2- at transmission housing.
-
Tighten mounting bolts for Multi-Function Transmission Range (TR) Switch.
Tightening torque: 8 Nm
Rest of installation is performed in the reverse order of removal.
-
Erase DTC memory of Transmission Control Module (TCM). Diagnostic mode 4: Reset/erase diagnostic data.
-
Generate readiness code.