Passat V6-2.8L (ATQ) (2004)
9
Clutch
-
To disengage, squeeze together at front
10
Change-over valve
-
to remove, unclip valve sideways from connection
-
before installing, unscrew cap, item 1
-
Checking Fig. 2
11
Vent line
-
Filler ventilation
-
Check for secure fitting
-
clipped in at top of fuel tank
-
secure with spring type clamps
-
to EVAP canister
12
Supply line
-
Black
-
Clipped in sideways at fuel tank
-
Check for secure fitting
-
secure with spring type clamps
13
Connector
-
Black, 4-pin
-
for sender for fuel gauge -G- and Fuel Pump (FP) -G6-
14
Union nut, 60 Nm
15
Fuel Pump (FP)
-
Note installation position at fuel tank Fig.1
-
only to be replaced complete with flange
-
Check Fuel Pump (FP)
-
Clean strainer if dirty
16
Return line
-
blue or with blue marking
-
Clipped in sideways at fuel tank
-
Check for secure fitting
-
secure with spring type clamps
-
from fuel return line at fuel rail
17
Sender for fuel gauge -G-
-
Clipped in at baffle housing in fuel tank
18
Seal
-
Replace if damaged
-
Coat with fuel when installing
19
Vent line
-
Operating ventilation
-
for drip reservoir Item 29
20
25 Nm
21
Vent line
-
Check for secure fitting
-
clipped in at top of fuel tank
22
Fuel tank
23
Bracket
-
For tension straps
-
Note installed position
24
Tension strap
-
Note varying lengths
-
Installation position: Locating point (hole) faces direction of travel
25
Retaining ring
-
Secured to body
26
10 Nm
27
Fuel filter
-
Installation position: Arrow points in direction of flow
28
Supply line
-
Black
-
Check for secure fitting
-
secure with spring type clamps
-
to fuel return line at fuel rail
29
Drip reservoir
30
Vent line
-
for drip reservoir Item 29
31
Connection hose
32
Elbow