Passat V6-2.8L (ATQ) (2004)
18
Seal
-
to install, place into opening of fuel tank when dry
-
Replace if damaged
-
only coat with fuel when installing flange
19
Vent line
-
Black
-
Check for secure fitting
-
secure with spring type clamps
20
Fuel Supply Sensor 3 -G237-
21
Heat shield
-
for fuel tank
22
Mounting clip
-
Check for secure fitting
23
Tension strap
-
Note installed position
24
Fuel Level Sensor 2 -G169-
25
Locking ring
-
Check for secure fitting
26
Fuel tank
27
Return line
-
blue or with blue marking
-
Check for secure fitting
-
secure with spring type clamps
-
from fuel return line at fuel rail
28
Supply line
-
Black
-
Check for secure fitting
-
secure with spring type clamps
29
Sender for fuel gauge -G-
-
Clipped in at baffle housing in fuel tank
30
Fuel Pump (FP)
-
Check Fuel Pump (FP)
-
Clean strainer if dirty
31
Supply line
-
Black
-
Check for secure fitting
-
secure with spring type clamps
-
to fuel return line at fuel rail
32
Fuel filter
-
Installation position: Arrow points in direction of flow
33
Vent line
-
Filler ventilation
-
Check for secure fitting
-
Clipped in sideways at fuel tank
-
secure with spring type clamps
-
to EVAP canister
34
Ground (GND) connection
-
Check for secure fitting
Fig. 1 Installation position of Fuel Pump (FP) flange
Marking on flange -1- must align with marking on fuel tank -2-.