Passat V6-2.8L (ATQ) (2004)
Body Control Module: Service and Repair
Comfort System Central Control Module -J393-, Removing And Installing
NOTE:
-
-J393- is located under the left front footwell carpet.
-
Connector assignments
-
Troubleshooting.
See VAS 5051 Vehicle Diagnostic Testing and Information System or VAS 5052 Vehicle Diagnostic and Service System in mode "Guided Fault
Finding".
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch off ignition and remove ignition key.
-
Remove left lower A-pillar trim and foot rest
-
Remove left front door sill plate trim
-
Remove driver's floor mat and move driver's seat to rearmost position.
-
Lift and support carpeting to expose control module (support with appropriate tool).
-
Lift control module housing protective cover -arrowA- and remove from holder -arrowB-.
-
Open protective cover.
-
Release retainer -arrow- and lift control module from housing.
-
Disconnect electrical connections.
Installing
Install in reverse order of removal.