Passat V6-2.8L (ATQ) (2004)
Vehicle Speed Sensor: Service and Repair
01V, 5 SPD. A/T (AWD)
Sensor, replacing, 01V, 5 SPD. A/T (AWD)
Removing
-
Remove left wheel.
Vehicles with TDI engine
-
Remove noise insulation for left drive axle from wheel housing - arrows -
Vehicles with V6- and V8-engine
-
Remove shielding plate/drive axle on left side.
Continued for all vehicles
-
Disconnect connector - arrow A - from sensor.
-
Push retaining bracket of sensor downward, and turn - arrow - toward front, outside.
-
Pull out sensor.
Installing
Installation is performed in the reverse order of removal. Pay attention to the following:
-
Replace O-rings - arrows -.
-
Insert new O-rings with axle oil.
-
Install sensor.