Passat V6-2.8L (ATQ) (2004)
-
Loosen hex nut - 2 - and remove lock bolt - 3 -.
-
Pull upholstery - 1 - in upper area out of clip - 4 -, press lower tab - 6 - to rear from sill panel - 7 - and remove upward with tab - 5 -.
-
Unscrew bolt - 1 - (40 Nm) and remove belt end fitting - 2 - from body.
NOTE: When installing, markings - 3 - and - 4 - must align to guarantee correct installation position of components.