Passat V6-2.8L (ATQ) (2004)
Ride Height Sensor: Testing and Inspection
Left Front Level Control System Sensor -G78- , Checking
Left front level control system sensor -G78- on front axle, checking
General information, Refer to Headlamp Alignment Sensor, Description and Operation.
Headlight basic settings
=> Perform setting in "Guided fault finding" using VAS 5051.
Note: To do so, you must enter by using the "Go to" key in "Function/Component selection".
1. Bracket
2. Left front level control system sensor - G78
^
Checked electrically via self-diagnosis
^
When complaints are received
^
Perform basic setting in "Guided fault finding" using VAS 5051.
Note: To do so, you must enter by using the "Go to" key in "Function/Component selection".
3. Hex socket head bolt, 10 Nm
4. Pop rivet
5. Self-locking nut, 10 Nm
^
Replace each time after removing
6. Suspension strut
7. Stabilizer bar connecting link
8. Coupling rod from left front level control system sensor -G78
^
Do not remove coupling rod off ball head!
9. Positioning marks on track control link indicate installation position of left front level control system sensor-G78
10. Control arm
11. Clip
^
Pry off, with a blade type screwdriver