Passat V6-2.8L (ATQ) (2004)
Power Steering Pump: Service and Repair
For 6-Cylinder 5-Valve, Removing and Installing
Power steering pump for 6-cylinder 5-valve, removing and installing
Special tools, testers and auxiliary items required
^
Hose clamps 3094
^
Drift 3204
^
Torque wrench V.A.G1331
-
Remove engine cover.
-
Pull ignition cables out of ignition coils.
-
Remove hex bolts - arrows A - and double bolt - arrow B
-
Lay ignition coils aside.
-
Identify direction of rotation of poly-V belt
-
To relieve tension on ribbed belt, push hex socket head wrench (10 mm AF) - direction of arrow
-
Align hole - A - with hole - B -
-
Insert locking pin 3204 to secure.
-
Take ribbed belt off belt pulley.
-
Remove belt pulley from power steering pump, using water pump wrench V.A.G 1590 to counter-hold if necessary.
-
Remove hex bolt - arrow - for pressure line - 1
-
Place oil tray under vehicle.
-
Clamp off suction hose with hose clamp 3094 .