Passat V6-2.8L (ATQ) (2004)
Axle Beam: Service and Repair
Rear Axle, Removing and Installing
Rear axle, removing and installing
Special tools, testers and auxiliary items required
Removal tool 80 - 200
Engine/transmission jack VAG 1383 A
Removing
^
Remove bolts with vehicle standing on its wheels (raise vehicle until the bolt is accessible).
^
Raise vehicle to assembly height to relieve the pressure on coil spring.
^
Pull rear axle down and remove coil spring with the help of a second mechanic if necessary.
^
Remove wheels.
^
Remove cover - arrows -.