Passat V6-2.8L (ATQ) (2004)
5. Splash plate
6. Speed sensor
^
Disconnect out to remove
^
Before inserting sensor, clean inner surface of installation hole and coat with grease G 000 650
7. Clamping sleeve
^
Before inserting into wheel bearing housing, coat circumference with grease G 000 650
^
Press into wheel bearing housing onto stop
Fig. 1 Pressing wheel hub out of 75 mm diameter wheel bearing housing
Fig. 2 Pressing wheel hub out of 82 mm diameter wheel bearing housing
Fig. 3 Pressing wheel bearing out of 75 mm diameter wheel bearing housing
Fig. 4 Pressing wheel bearing out of 82 mm diameter wheel bearing housing