Passat V6-2.8L (ATQ) (2004)
Fluid Line/Hose: Service and Repair
01V, 5 SPD. A/T (AWD)
ATF Lines, Removing and Installing
ATF lines, removing and installing (vehicles with V6 gasoline engine), 01V, 5 SPD. A/T (AWD)
1. Hex bolt, 20 Nm
^
before tightening bolt, push in line onto stop by hand
2. ATF line
^
to cooler
^
Note color identification - arrow -
^
Pay attention to label on transmission housing
3. ATF line
^
From cooler
^
Note color identification - arrow -
^
Pay attention to label on transmission housing
4. O-ring
^
Insert with ATF
^
Always replace
5. Hex bolt, 65 Nm
6. Hex bolt, 10 Nm
7. Bracket
8. Union nut, 30 Nm
9. ATF line