Passat V6-2.8L (ATQ) (2004)
/Page-2021003.png)
^
Route locking cable free of kinks.
^
Turn ignition key to run position (ignition on).
^
Insert locking cable into ignition/starter switch.
^
Check interlock lever - 1 -.
^
Secure locking cable to airbag sensor using cable clip - 2 -.
^
Turn ignition key into locking position (ignition off).
^
Place selector lever in position "P".
^
Hook locking cable into locking lever and clip locking cable support bracket - 3 - in securing spring for selector mechanism housing.
