Passat V6-2.8L (ATQ) (2004)
-
Tighten bolts securing support bracket to transmission -arrows 1- and secure selector lever cable to support bracket -arrow 2- to specified torque,
B-Support bracket. When doing this, counterhold on hex -arrow 3-.
-
Tighten nuts (qty. 4).
-
Check selector lever cable adjustment, adjust if necessary.
-
Remove left-hand transmission bracket.
Vehicles with V6 engine
-
Install selector lever cable protective plate.
-
Install front exhaust system with catalyst.
Continued for all vehicles
-
Install noise insulation.
Tightening torques
Selector Mechanism Cover (Assembly Overview), Disassembling and Assembling