Passat V6-2.8L (ATQ) (2004)
Valve Body: Service and Repair
01V, 5 SPD. A/T (FWD)
Valve Body For Transmissions With Hydraulic Control Type E17, Assembly Overview
Valve body for transmissions with hydraulic control Type E17, assembly overview, 01V, 5 SPD. A/T (FWD)
WARNING: Do not run engine or tow vehicle with oil pan removed or when there is no ATF in transmission.
^
The valve body can be removed with the transmission installed.
^
Apply only ATF to O-rings when installing. Other lubricants lead to malfunctioning of the transmission hydraulics.
^
Always replace soiled or defective valve body.
^
Use only lint-free cloths.
^
Check and top up ATF when oil pan has been refitted.
1. Drain plug, 40 Nm
^
With seal
^
Always replace
^
Remove plug to drain ATF
2. Bolt, 10 Nm
^
Tighten oil pan bolts in several stages and in diagonal sequence
3. Oil pan
4. Gasket
^
Always replace
5. Magnet
^
4 magnets in depressions in oil pan