Passat V6-2.8L (ATQ) (2004)
WARNING: Do not run engine or tow vehicle with oil pan removed or when there is no ATF in transmission.
The valve body can be removed with the transmission installed.
^
Apply only ATF to O-rings when installing. Other lubricants lead to malfunctioning of the transmission hydraulics.
^
Always replace soiled or defective valve body.
^
Use only lint-free cloths.
^
Check and top off ATF when oil pan has been re-installed.
1. Drain plug, 40 Nm
^
With seal
^
Always replace
^
Remove plug to drain ATF
2. Bolt, 10 Nm
^
Tighten oil pan bolts in several stages and in diagonal sequence
3. Oil pan
4. Gasket
^
Always replace
5. ATF screen
6. Bolt
^
Bolts securing valve body: 16 bolts M6 x 60
^
Observe correct tightening sequence
^
Tightening torque: 8 Nm
7. Valve body
^
Select correct version according to transmission code
8. Bolt, 8 Nm
9. Retainer