Passat V6-2.8L (ATQ) (2004)
/Page-2092009.png)
^
For wiring harness
^
Engage wiring harness on bracket
^
Secured with bolts for valve body
10. Bolt, 6 Nm
11. Transmission vehicle speed sensor (VSS) -G38- and Sender for transmission output RPM -G195-
12. Spacer sleeve
^
Length: 8 mm
13. Internal oil pipe
^
Always replace
14. O-ring
^
Always replace
^
Moisten with ATF and insert
15. Speedometer vehicle speed sensor (VSS) -G22- and Vehicle speed sensor -G68-
16. O-ring
^
Always replace
^
Moisten with gear oil and insert
17. Multi-function Transmission Range (TR) switch -F125-
18. Bolt, 8 Nm
19. O-ring
^
Always replace
^
Moisten with ATF and insert
20. Securing clip
^
Always replace
21. Wiring harness
^
Replacing => Page 38-48
^
Transmission fluid (ATF) temperature sensor -G93- integrated in wiring harness
^
Disengage harness from bracket -item 10-
^
Position of connector on harness: flat part of rear collar faces toward oil pan; lugs on collar are horizontal
22. Bolt, 9 Nm
23. Sensor for Transmission RPM -G182-
24. Connector
^
Is pulled off wiring harness in transmission
^
Must be pulled off before removing the valve body
25. Bolt, 6 Nm
26. Retainer
^
For solenoid valve
27. Pressure control valve 1 -N215-
^
With O-ring
^
To replace: remove and install valve body
^
Moisten O-ring with ATF and insert
28. Solenoid valve 3 -N90-
^
Without O-ring
29. Solenoid valve 2 -N89-
^
Without O-ring
30. Bolt, 6 Nm
31. Retainer
^
For solenoid valves
32. Pressure control valve 3 -N217-
^
With O-ring
^
Moisten O-ring with ATF and insert
